ZyXEL Communications AMG1302 Manual Do Utilizador
Chapter 25 Remote Management
AMG1302/AMG1202-TSeries User’s Guide
230
25.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.
versa.
Use this screen to set from which IP address the AMG1302/AMG1202-TSeries will accept DNS
queries and on which interface it can send them your AMG1302/AMG1202-TSeries’s DNS settings.
This feature is not available when the AMG1302/AMG1202-TSeries is set to bridge mode. Click
Maintenance > RemoteMGMT > DNS to change your AMG1302/AMG1202-TSeries’s DNS
settings.
queries and on which interface it can send them your AMG1302/AMG1202-TSeries’s DNS settings.
This feature is not available when the AMG1302/AMG1202-TSeries is set to bridge mode. Click
Maintenance > RemoteMGMT > DNS to change your AMG1302/AMG1202-TSeries’s DNS
settings.
Figure 122
Maintenance > RemoteMGMT > DNS
The following table describes the labels in this screen.
25.7 The ICMP Screen
To change your AMG1302/AMG1202-TSeries’s security settings, click Maintenance >
RemoteMGMT > ICMP. The screen appears as shown.
RemoteMGMT > ICMP. The screen appears as shown.
If an outside user attempts to probe an unsupported port on your AMG1302/AMG1202-TSeries, an
ICMP response packet is automatically returned. This allows the outside user to know the
ICMP response packet is automatically returned. This allows the outside user to know the
Table 89
Maintenance > RemoteMGMT > DNS
LABEL
DESCRIPTION
Server Port
This displays the service port number for accessing the AMG1302/AMG1202-
TSeries. If the number is grayed out, it is not editable.
TSeries. If the number is grayed out, it is not editable.
Access Status
Select the interface(s) through which a computer may send DNS queries to the
AMG1302/AMG1202-TSeries.
AMG1302/AMG1202-TSeries.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to send DNS queries to
the AMG1302/AMG1202-TSeries.
the AMG1302/AMG1202-TSeries.
Select All to allow any computer to send DNS queries to the AMG1302/AMG1202-
TSeries.
TSeries.
Choose Range to just allow the computer(s) with an IP address in the range that
you specify to send DNS queries to the AMG1302/AMG1202-TSeries.
you specify to send DNS queries to the AMG1302/AMG1202-TSeries.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.