ZyXEL Communications AMG1302 Manual Do Utilizador

 Chapter 25 Remote Management

AMG1302/AMG1202-TSeries User’s Guide

AMG1302/AMG1202-TSeries exists. Your AMG1302/AMG1202-TSeries supports anti-probing, which 
prevents the ICMP response packet from being sent. This keeps outsiders from discovering your 
AMG1302/AMG1202-TSeries when unsupported ports are probed. 

Note: If you want your device to respond to pings and requests for unauthorized services, 

you will also need to configure the firewall accordingly by disabling SPI. 

Maintenance > RemoteMGMT > ICMP

The following table describes the labels in this screen.  

You can use Secure SHell (SSH) to securely access the AMG1302/AMG1202-TSeries’s command line 
interface. Specify which interfaces allow SSH access and from which IP address the access can 
come. SSH is a secure communication protocol that combines authentication and data encryption to 
provide secure encrypted communication between two hosts over an unsecured network.

Click Maintenance > RemoteMGMT > SSH tab to display the screen as shown. 

Maintenance > RemoteMGMT > ICMP

Respond to Ping on The AMG1302/AMG1202-TSeries will not respond to any incoming Ping requests when 

Disable is selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to 
reply to incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both 
incoming LAN and WAN Ping requests. 

Secured Client IP 
Address

A secured client is a “trusted” computer that is allowed to send Ping requests to the 
AMG1302/AMG1202-TSeries.

Select All to allow any computer to send Ping requests to the AMG1302/AMG1202-
TSeries.

Choose Range to just allow the computer(s) with an IP address in the range that you 
specify to send Ping requests to the AMG1302/AMG1202-TSeries.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.