Sanyo PLV-Z700 Manual Do Utilizador

Clear the check mark if 
you do not want to apply 
this adjusted color data 
to the projected image. 

Select [Yes] to delete 
the selected color data.

Select the DEL box 
if you want to delete 
the adjusted data. 
A confirmation box 
appears.

COLOR MANAGEMENT LIST
  Select Color management in the Advanced menu and then 

press the Point 

8

 or OK buttons. The COLOR MANAGEMENT 

LIST appears. You can store up to eight (8) color management 
data in the list. 

  In the COLOR MANAGEMENT LIST, the adjusted color data 

are check marked reflecting the changes in the image. You can 
choose whether to apply the data in the list to the image. 

  Clear the check mark if you do not want to apply the data; select 

the check mark and then press the OK button. The check mark 
disappears.

  If you want to readjust the color, select a color data box in the 

list and press the OK button. The COLOR SELECTION window 
appears and you can readjust the color. See below for color 
selection.

  If you want to delete a particular data in the list, select the DEL 

box and then press the OK button. A confirmation box appears. 
Select [Yes] and then press the OK button.

  Press the OK button when selecting the following items.
  ALL DEL . . . . . .    Delete all the data in the list. Press the OK 

button and a confirmation box appears. Select 
[Yes] and press the OK button.

  COLOR M. . . . .    Go to COLOR SELECTION.
  EXIT  . . . . . . . . .    Exit the Color management mode and return 

to the Advanced menu. To store the adjusted 
data, see “Store” on the next page.

 
  Press the MENU button when you want to return to the 

Advanced menu.

COLOR SELECTION
  Press the OK button when “COLOR M.” in the COLOR 

MANAGEMENT LIST is selected. The COLOR MANAGEMENT 
LIST disappears and the Color management pointer appears. 

  Use the Point 

ed 7 8

 buttons to move the pointer to a 

spot where you want to adjust the color and then press the 
OK button. The image freezes and the COLOR SELECTION 
window appears. (Note that when certain colors are chosen, an 
exclamation mark is displayed indicating that these colors are not 
adjustable.)

  Use the Point 

ed

 buttons to select COLOR LEVEL, COLOR 

PHASE, or GAMMA and the Point 

7 8 

buttons to adjust 

them. While adjusting, the changes are reflected in the image 
accordingly. If you press the MENU button while operating the 
color selection, the Color management pointer will be reset. 

  After adjusting, press the OK button to go to the COLOR 

MANAGEMENT LIST.

Color management pointer
Use the Point 

ed 7 8

 buttons to move 

the pointer to a spot where you want 
to adjust the color and then press the 
OK button. The COLOR SELECTION 
window appears.

Go to the COLOR MANAGEMENT LIST.

After adjusting COLOR LEVEL, 
COLOR PHASE, and GAMMA, 
press the OK button.

To store the adjusted data, exit 
the Color management mode 
and go to “Store” in the Image 
adj. Menu (see page 33).

Color data box