Sanyo PLV-Z700 Manual Do Utilizador

To store the adjusted data, select Store and press the Point

OK buttons. The User Image Mode Menu appears. Use the Point

buttons to choose one of the five (5) user image modes and

press the Point

or OK buttons. A confirmation box appears.

Select [Yes] and then press the OK button.

To exit the User Image Mode Menu, go to the Quit icon and press
the Point

or OK buttons. The stored data can be called up by

selecting “User image 1 – 5” in the Image Mode Selection on
page 27.

Store

To reset the adjusted data, select Reset and press the Point

OK buttons. A confirmation box appears. Select [Yes] and then
press the OK button. All adjustments return to their previous
figures. You can also reset the adjusted data by pressing the
RESET button on the remote control.

Reset

Press the Point

OK buttons to store the
adjusted data. The User
Image Mode Menu
appears.

✔

Note:

• If you change the image mode (see page 27) or turn off the

POWER without storing adjusted settings, all the adjusted settings
will be reset.

• When resetting, the adjusted data in Advanced menu will be reset

whether or not Advanced menu in the Setting Menu is “On.” See
page 37.

Quit
Press the Point

or OK buttons

to exit the User
Image Mode
Menu.

Image Adjustment

Choose one of the five (5) user
image modes with the Point

buttons and press the Point

OK buttons. The confirmation box
appears.

Select [Yes] and then press the
OK button.