Sanyo PLC-HP7000L Manual Do Utilizador

  When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the 

WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter 

cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter 

cartridge (p.73). 

  When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this 

indicator lights orange, replace the projection lamp with a new one promptly (p.74).

86

POWER

LAMP/

SHUTTER

LAMP

REPLACE

WARNING

FILTER

WARNING

TEMP.

The temperature inside the projector is elevated 

close to the abnormally high level.
The temperature inside the projector is 

abnormally high. The projector cannot be turned 

on. When the projector is cooled down enough 

and the temperature returns to normal, the 

POWER indicator lights green and the projector 

can be turned on. (The WARNING TEMP. 

indicator keeps blinking.) Check and replace the 

filter.
The projector has been cooled down enough and 

the temperature returns to normal. When turning 

on the projector, the WARNING TEMP. indicator 

stops blinking. Check and replace the filter.
The lamp cannot light up. (The projector is 

preparing for stand-by or the projection lamp 

is being cooled down. The projector cannot be 

turned on until cooling is completed.)
The lamp cannot light up. (The lamp has been 

cooled down enough and the projector is in 

stand-by mode and ready to be turned on with 

the ON/STAND-BY button.)

The lamp has been used overtime. Replace the 

lamp immediately.



























❖

❖

❖

❖

❖