Sanyo PLC-HP7000L Manual Do Utilizador

87

POWER

LAMP/

SHUTTER

LAMP

REPLACE

WARNING

FILTER

WARNING

TEMP.

If the Filter counter reaches a time set in the 

timer setting, a Filter replacement icon (Fig.2) will 

appear on the screen and the WARNING FILTER 

indicator on the top panel will light up. Replace 

the filter as soon as possible. If the filter is out 

of scroll and the projector reaches a time set in 

the timer setting, Fig. 3 will appear on the screen 

and the WARNING FILTER indicator will light up. 

Replace the filter cartridge as soon as possible.

If the filter is clogged and no scroll is left in the 

filter cartridge, a Filter cartridge replacement 

icon (Fig.4) will appear on the screen and the 

WARNING FILTER indicator will light up. Replace 

the filter cartridge as soon as possible.



    Fig.2, Fig.3 and Fig.4 icon will not appear

The filter cartridge is not installed in the projector. 

Check the filter compartment to see if the filter 

cartridge is installed in the projector. When the 

filter cartridge is installed and the indicators 

continue to light and blink, read the column 

below.
The projector detects an abnormal condition and 

cannot be turned on. Unplug the AC power cord 

and plug it again to turn on the projector. If the 

projector is turned off again, unplug the AC power 

cord and contact the dealer or the service center. 

Do not leave the projector on. It may cause an 

electric shock or a fire hazard.

The shutter is out of control. 

The shutter is out of control. (The projector is in 

the cooling mode.)
The shutter is out of control. (The projector is 

in the stand-by mode.) In that case, contact the 

service center immediately.

Fig .2   Filter replacement icon

Fig .4   Filter cartridge replacement icon























❖

❊

❊

❊