Sanyo 1AV4U19B25500 Manual Do Utilizador

Network Capture screen

Confirm that the projector has connected to the LAN properly.

Network Projector List

Search PJ button

1. Activate “Network Capture 5” which is installed into the computer connected to the LAN .
2. After “Searching projector” message appears, the name of the projector* appears on the Network 

Projector List, then the network setting has completed properly.

  When  the  name  of  the  projector  does  not  appear  and  error  screen  appears,  the  network  has 

not connected yet. Try searching again with the Search PJ button. If error screen appears again, 
reconfirm the LAN setting. When the projector is set in the location separated by the router, see next 
page.

  When Firewall function (Anti-virus software) is effective, network projector may not be found.  In that 

case, disable the Firewall function and try searching again.

✳ 

If  the  projector  is  named,  the  name  will  be  displayed. The  name  can  be  set  with  the  following  

procedures in “6. Basic setting and operation” ➔ “Initial setting” (p50) . If the projector is not named, 
IP address of the projector will be displayed.