Viewsonic VS13835 Manual Do Utilizador

Setting input ports using menu

251

ViewSonic

Pro9500

5.4 Setting the menu

If Intellectual Stack with RS-232C connection is used, observe the followings.

When inputting image signals to Sub via Main, the operations differ between using

computer signals and video signals such as component and video signals.

Inputting image from Main to Sub - Computer signal

If the STACK menu is already displayed on the screen, proceed to 3 below.

Otherwise press the

MENU button on the remote control.

If the MENU dialog is displayed, use the ▲/▼ buttons to

highlight MAIN, and press the ► button. A menu will be

displayed.

If the MENU dialog is not displayed, the STACK menu will appear.

Use the ▲/▼/◄/► buttons to go into the following menu.

ADVANCED MENU > OPTION

> SERVICE > COMMUNICATION > STACK

STACK menu will appear on screen. (Oper-

ating Guide → OPTION menu)

Use the ▲/▼ buttons to highlight SUB INPUT

SOURCE, and press the ► button to display the

SUB INPUT SOURCE dialog.

Use the ▲/▼ buttons to highlight FIXED (COMPUTER IN 1), and press the ►

button to complete the setting.

Press the

COMPUTER or VIDEO button on the

remote control or the

INPUT button on the control

panel of the Main projector, the MAIN INPUT

SOURCE dialog is displayed on screen. Use the

▲/▼ buttons to highlight the port to which the sig-

nal cable is connected, and press the ► button to

complete the setting.

NOTE

• When FIXED (COMPUTER IN 1) is selected, the MONITOR OUT

setting is invalid. (Operating Guide → SETUP menu)

• When FIXED (COMPUTER IN 1) is selected, input sources other than

COMPUTER IN1 and COMPUTER IN2 cannot be selected.

• When FIXED (COMPUTER IN 1) is selected, if any button for setting the

input ports including

COMPUTER, VIDEO, MY SOURCE/DOC.CAMERA and

MY BUTTON (assigned with input source related functions) buttons on the

remote control and the

INPUT button on the projector is pressed, the dialog for

selecting the input source will be displayed.