EIKI LC-WUL100L Manual Do Utilizador

When replacing the lens or using an optional lens, install the lens by following the instructions below. 

Ask the sales dealer for detailed information of the optional lens specifications. 

Shift the lens to the central position by using the 

Lens shift function (p.27).

Lens release button

Be careful when handling the lens. Do not drop.

While pressing the Lens release button on the top

of the cabinet, turn the lens counterclockwise until

it stops and pull it out slowly from the projector.

Turn off the projector and unplug the AC power 

cord. 

  ●   Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, 

electrical shock, fire hazard or other accidents.

  ●   Before installing or replacing the lens, check that the Model No. of the Projection Lens matches with 

the projector.

  ●  For details of the lens and installation, contact the sales dealer where you purchased the projector.

Fit the lens to the projector by aligning the red dot 

on the lens with the red dot of the projector.
Slowly turn the lens clockwise until it clicks. Make 

sure that the lens is fully inserted to the projector.

Remove the lens mount cover.

Do not press the lens release button when 

attaching the lens.

Red 

dots

18