EIKI LC-WUL100L Manual Do Utilizador

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the 

remote control codes prevents interference from other remote controls when several projectors or video 

equipment next to each other are being operated at the same time. Change the remote control code for 

the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on 

page 58.

Press and hold the MENU and a number 

button (1–8) for more than five seconds to 

switch among the codes.

Press and hold the MENU and a number 

button (1-8) that corresponds to the 

remote control code for more than five 

seconds to switch among the codes. 

Adjustable 

Feet

Projection angle can be adjusted up to 4.0 degrees with 

the adjustable feet. 

Rotate the adjustable feet and tilt the projector to the 

proper height; to raise the projector, rotate the feet of 

both clockwise.

To lower the projector or to retract the adjustable feet, 

rotate the feet of both counterclockwise.

To reset the remote control code, press and 

hold the MENU and the number button 0 for 

more than five seconds.

16