EIKI LC-WUL100L Manual Do Utilizador

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes

clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup

and adversely affect the life of the projector. This projector has an electrically operated filter which helps you

to replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with

a new one automatically when it detects the clogging.

If the projector reaches a time set in the timer setting

(p.65), a Filter replacement icon (Fig.1) appears on the

screen and the WARNING FILTER indicator on the top

panel lights up (p.81). When you see this icon, replace

the filter as soon as possible (pp.30, 58). If the filter is out

of scroll and the projector reaches a time set in the timer

setting, Fig. 2 appears on the screen, indicating that the

filter cartridge replacement is necessary.

When the filter scroll is counted down to

0, the Last scroll

icon (Fig.3) appears on the screen, indicating that there is

one scroll left in the filter cartridge (p.65).

If the projector detects that the filter is clogged and

no scroll is left in the filter cartridge, a Filter cartridge

replacement icon (Fig. 4) appears on the screen and the

WARNING FILTER indicator on the top panel lights up

(p.81). When you see this icon, replace the filter cartridge

(p.67) and reset the Filter counter (p.68) and the Scroll

counter (p.68).

When the filter is being scrolled using the remote control

(p.30) or the Filter control function in the setting menu

(p.58), a Filter replacement icon and

Please wait . . .

message (Fig.5) appear on the screen and the WARNING

FILTER indicator blinks slow (approx. 2 seconds ON, 2

seconds OFF) (p.79).

The WARNING FILTER indicator blinks fast when the

projector detects an abnormal condition, the filter cartridge

is not installed properly, or the filter scroll is not working

properly (p.81).

Fig .1 Filter replacement icon

Fig .4 Filter cartridge replacement icon

Fig .3 Last scroll icon

Maintenance and Care



Note:

• Fig.1, Fig.2, Fig.3, Fig. 4 and Fig.5 will not appear

when the Display function is set to

Off (p.52) or during

“Freeze” (p.30).

• The filter cannot be rewound.

• The filter can be scrolled 9 times since in the filter

cartridge there are 10 scrolls in total.

• The filter cartridge is disposable. Do not clean and

reuse the filter cartridge.

• Do not expose the filter cartridge to water or liquid, or it

may cause a breakdown.

• Replace the filter cartridge after all the scrolls are used

up. If you replace the filter cartridge when there are

some scrolls left in the filter cartridge, the filter counter

and the scroll counter do not recognize the correct

number of remaining scrolls and the reset function

cannot work properly. It may cause a breakdown.

• Do not use the filter cartridge with other projector.

Fig .5 Filter replacement icon and

Please wait . . . message.

The filter counter and the scroll counter

do not recognize the correct number

of remaining scrolls of the used filter

cartridge and the reset function cannot

work properly. It may cause a breakdown.

• Make sure that the projection lamp is

turn off when you are replacing the filter

cartridge. If you replace the filter cartridge

when the projection lamp is turn on, the

projector will be shut down automatically

for safety purpose.

• Do not forget to reset the filter counter

and the scroll counter in the setting

menu after replacing the filter cartridge.

If you forget to reset the filter counter

and the scroll counter, the projector

cannot recognize the correct number

of remaining scrolls and may cause a

breakdown.

• When the projector is kept being used

for 3 minutes without getting the filter

cartridge replaced after the Fig.4 appears

on the screen, the projector is turned off

automatically to prevent the damage of

optical components.

Fig .2

Filter Instructions