EIKI LC-WUL100L Manual Do Utilizador

Turn off the projector, and unplug the AC power cord 

from the AC outlet.
First, clean up the dust on the projector and around 

the air vents.

Press ▼ downwards on the filter cover to release the 

latch and open the filter cover.

Put the new one back into the position and close 

the filter cover. Make sure that the filter cartridge is 

properly and fully inserted.

Make sure the filter cartridge is inserted in the 

projector. If the filter cartridge is not inserted, the 

projector cannot be turned on. 

Do not put anything into the air vents. Doing so 

may result in malfunction of the projector.

Reset the filter counter and the scroll counter (p.68).

Filter cover

Pull out the filter cartridge. When taking out the filter 

cartridge, put your finger on the filter cartridge’s tab 

and then pull.

Latch

Filter 

cartridge

Tab

When using the projector under dusty or smoky 

conditions, dust may accumulate on a lens, liquid crystal 

panels, or optical elements inside the projector. Such 

condition may degrade the quality of the projected image.

When the symptoms above are noticed, contact your 

authorized dealer or service center for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE
Replacement  filter  cartridge  can  be  ordered  through 

your  dealer.  When  ordering,  give  the  following 

information to the dealer.
  ●   

      LC-WUL100, LC-WUL100L
  ●   

      Service Parts No. 610 346 9034

Connect the AC power cord to the projector and turn 

on the projector.

67