EIKI LC-WUL100L Manual Do Utilizador

The WARNING indicators show the state of the function which protects the projector. Check the state of the 

WARNING indicators and the POWER indicator to take proper maintenance. 

indicator is blinking red .
When the temperature inside the projector reaches a

certain level, the projector will be automatically shut down 

to protect the inside of the projector. The POWER indicator 

is blinking while the projector is being cooled down. When 

the projector has cooled down enough (to its normal 

operating temperature), it can be turned on again by 

pressing the ON/STAND-BY button.



    The WARNING TEMP. indicator continues to blink

–   Did you provide appropriate space for the projector to be 

ventilated? Check the installing condition to see if the air 

vents of the projector are not blocked.

–   Has the projector been installed near an Air-Conditioning/ 

Heating Duct or Vent? Move the installation of the 

projector away from the duct or vent.

–  Is the filter clean? Replace the filter with a new one.

lighting and other indicators are blinking .
When the projector detects an abnormal condition, it 

will be automatically shut down to protect the inside 

of the projector and the LAMP indicator lights on and 

other indicators blink. In this case, unplug the AC 

power cord and plug it, and then turn on the projector 

once again to verify operation. If the projector cannot 

be turned on and these indicators are still lighting and 

blinking, unplug the AC power cord and contact the 

service center.

DO NOT LEAVE THE PROJECTOR WITH THE 

AC POWER CORD CONNECTED UNDER AN 

ABNORMAL CONDITION. IT MAY RESULT IN 

FIRE OR ELECTRIC SHOCK.

72