EIKI LC-WUL100L Manual Do Utilizador

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 

contains a small amount of non-abrasive camera lens 

cleaner, or use a lens cleaning paper or commercially 

available air blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents, or other harsh chemicals might scratch 

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning 

cloth. When the cabinet is heavily soiled, use a small 

amount of mild detergent and finish with a soft dry 

cleaning cloth. Avoid using an excessive amount of 

cleaner. Abrasive cleaners, solvents, or other harsh 

chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in 

an appropriate carrying case to protect from dust and 

scratches.

Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire 

hazard may occur even after the AC power cord is unplugged because the temperature inside the projector 

is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not 

only by the flammable air spray but also by the cold air.

71