Sony STRDN1020 Manual Do Utilizador

D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STR-
DN1020-CEL.fm

STR-DN1020

4-273-051-14(1)

 

 

 

 

 

 

 

 

 

 

• Check the setting of “Audio Out” in the 

HDMI Settings menu (page 98).

• Check that the equipment is connected 

correctly to the HDMI jack for that 
equipment.

• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback equipment, 

you may need to set up the HDMI setting 
of the equipment. Refer to the operating 
instructions supplied with each 
equipment.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour) or 3D transmission.

• Sound may not be output from the receiver 

while the GUI appears on the TV screen. 
Press GUI MODE to select “GUI OFF”.

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “Audio Out” 
settings in HDMI Settings menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and 
receiver.

– “AMP” if you want to listen to the 

sound from the receiver.

• When you connect the receiver to a video 

equipment (projector, etc.), sound may not 
be output from the receiver. In this case, 
select “AMP”.

• If you cannot listen to the sound of the 

equipment connected to the receiver while 
TV input is selected on the receiver.
– Be sure to change the input of the 

receiver to HDMI when you want to 
watch a program on the equipment 
connected via HDMI connection to the 
receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Be sure to select the correct equipment 

or input you want when you watch a 
program from the equipment connected 
to the TV. Refer to the operating 
instructions of the TV on this operation.

• Check that the equipment is connected 

correctly.

• Select the source equipment using the 

input buttons (page 46).

• Check that the playback component is 

connected to a digital jack and the input is 
selected properly on this receiver.

• Check whether the input source of the 

software being played back corresponds to 
the multi channel format.

• Check whether the setup on the playback 

component is set to multi channel sound.

• Check to make sure the selected digital 

audio input jack is not assigned to other 
inputs in “Input Assign” in the Input 
Option menu (page 86).

• Check that the PARTY STREAMING 

function is not being used. To close a 
PARTY, press SHIFT, then hold down 
PARTY until “CLOSE PARTY” appears. 
For details, see page 77.