Pitney Bowes DM900 Manual Do Utilizador

Time Date Stamping mode allows you to print the current time and date, 

along with the word “Received” on incoming mail.

The time and date will remain the same during a single transaction 

(whether you process a single envelope or 100 envelopes.) The system will 

update the date and time during the mail run.  

1. Press the 

Mode key.

2. Select 

Time and Date Stamping. 

3. Turn the piece of mail over, so the meter stamp is facing down. Then, 

place the envelope on the feed deck with the flap facing up.

4. Press the 

Start key. The Time/Date stamp prints on the envelope. A 

sample Time/Date stamp is shown below. 

5. Press the 

Start key. The Time/Date stamp prints on the envelope.

NOTE:  If you are using INIVEW™ Accounting, Time and Date Stamping mode 

has additional attributes. Refer to “Selecting an Account in Time Date Stamping 

Mode” in Chapter 7 for more information. 

NOTE:  The mailing system may operate at a slightly slower speed dur-

ing this process.