Star Micronics LC-8211+ Manual Do Utilizador

Página de 109
20     Control Panel Operations
Selecting a font
Make sure the printer is off-line (
ON LINE 
indicator is not lit).
Press 
FONT 
to change the font selection. An indicator lights to the left of 
the name of the font that is currently selected.
Selecting the Quiet Print Mode
The Quiet Print Mode lets you print with less noise than that produced with 
normal printing. Use the following procedure to enter and exit the Quiet Print 
Mode.
Important!
Though the Quiet Print Mode prints more quietly, it also causes printing to 
take considerably longer than normal printing.
Make sure the printer is on-line (
ON LINE 
indicator is lit).
Press 
FONT
, to toggle between the Quiet Print Mode and normal printing.
The 
QUIET
 indicator is lit when the Quiet Print Mode is selected, and is not 
lit when normal printing is selected.
Changing the auto load position
Normally the printer automatically feeds paper to a standard position (1/6-inch 
from the top of the paper). This is called the auto load position. You can use the 
following procedure to specify a different auto load position.
Make sure the printer is off-line (
ON LINE
 indicator is not lit).
While holding down 
ON LINE
, press 
FONT
 and then release the two 
buttons.
The printer will automatically eject the cut-sheet that is in the printer, or 
reverse feed fanfold paper until it is no longer in contact with the platen. 
Also, all the font and pitch indicators on the control panel will light.
Lit Indicator
Font Name
ROMAN
Roman
ROMAN + COURIER
Sanserif
COURIER
Courier
COURIER + ORATOR
Prestige
ORATOR
Orator