Star Micronics LC-8211+ Manual Do Utilizador
18 Control Panel Operations
Paper loading
❏
Prepare either cut-sheet or fanfold paper for feeding.
For details on how to prepare for paper feeding, see page 9 for fanfold paper
and page 59 for cut-sheet paper.
For details on how to prepare for paper feeding, see page 9 for fanfold paper
and page 59 for cut-sheet paper.
❏
The
POWER
indicator flashes to indicate there is no paper in the printer.
❏
When using fanfold paper, press
LF
to feed the paper into the printer.
When using cut-sheet paper, insert the paper into the front of the printer
using the left paper guide. The paper is automatically fed into the printer.
using the left paper guide. The paper is automatically fed into the printer.
Line feed
❏
Make sure the printer is off-line (
ON LINE
indicator is not lit).
❏
Press
LF
once to feed paper one line. Holding down
LF
continually feeds
paper, one line at a time, until you release the button.
Paper eject (cut-sheet paper)
❏
Make sure the printer is on-line (
ON LINE
indicator is lit).
❏
Press
LF
to eject the paper.
❏
After the paper is ejected, the printer will beep and the
POWER
indicator
will flash to indicate there is no paper in the printer.
Form feed (fanfold paper)
❏
Make sure the printer is off-line (
ON LINE
indicator is not lit).
❏
While holding down
LF
, press
ON LINE
to feed the paper to the top of the
next page.
Parking fanfold paper
❏
Make sure the printer is on-line (
ON LINE
indicator is lit).
❏
Press
LF
to eject the paper.
❏
After the paper is ejected, the printer will beep and the
POWER
indicator
will flash to indicate there is no paper in the printer.
❏
Later, you can press
LF
again to feed the paper back into the printer.