Tally Genicom 5040 Manual Do Utilizador

The setting of Parity of the Host PC 
differs from the Parity setting of the 
serial interface of the printer.
“?” is printed instead of the received 
data until the error is canceled.

`

If STOP key is pressed, the error is 
canceled and the printer is in offline 
(STOP) state.

`

Make the Parity settings of Host PC 
and printer compatible.

The data sent by the serial interface 
exceed the currently prepared Overrun 
Buffer.
“?” is printed instead of the received 
data until the error is canceled.

`

If STOP key is pressed, the error is 
canceled and the printer is in offline 
(STOP) state.

`

Check the protocol and/or the hand-
shake of the serial connection.

Olivetti emulation: the printer 
receives printing data, printing start, bit 
image or vertical position change com-
mand while the cover is open.

`

When Reset Error Command or 
General Reset Command (PR2) is 
received, if the cover is closed, the 
error is canceled, and it is in a online 
state.

`

If STOP Key is pressed, if the cover 
is closed, the printer is in a offline 
(STOP) state, and the error is can-
celed.

Epson/IBM emulation: The cover 
open sensor has detected that the 
cover is open.
If cover open state is detected while 
printing, the print out of data will stop 
after the processing of data under edit 
is completed. The LCD display will 
change to Cover Open after printing 
stops.
If paper is at TOF position, printing will 
not be performed and the paper will be 
ejected.
During cover open state inserted 
paper will not be loaded into the 
printer.

`

If the cover is closed, the printer is 
shifted to online state.

`

If the cover is opened during other 
errors (e.g. Paper Jam Error, Paper 
Length Error) occur, the LCD mes-
sage will not be changed. However, 
if the cover is closed in that error 
state, those errors will be canceled.