Canon iPF8400SE Manual Do Utilizador
The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause
Corrective Action
The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.
not be advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll from the Printer.")
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause
Corrective Action
The leading edge of the roll paper
was cut to straighten it.
was cut to straighten it.
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value
other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good condition
for printing.
(See "Checking for Nozzle Clogging.")
for printing.
(See "Checking for Nozzle Clogging.")
A print job was received from an in-
compatible printer driver.
compatible printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer is damaged.
Contact your Canon dealer for assistance.
An error message is shown on the Display Screen
iPF8400SE
Troubleshooting
The printer stops during a print job
590