Справочник Пользователя для Canon iPF8400SE

The printer stops during a print job

The printer stops during a print job

Cause

Corrective Action

The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.

Remove the used roll and insert a new roll.
 (See "Removing the Roll from the Printer.")

Cause

Corrective Action

The leading edge of the roll paper
was cut to straighten it.

The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value
other than Off in the Control Panel menu.
 (See "Cutting the Leading Edge of Roll Paper Automatically.")

The Printhead nozzles are clogged.

Print a test pattern to check the nozzles and make sure the Printhead is in good condition
for printing.
 (See "Checking for Nozzle Clogging.")

A print job was received from an in-
compatible printer driver.

Use the correct imagePROGRAF printer driver for the printer and try printing again.

The printer is damaged.

Contact your Canon dealer for assistance.

An error message is shown on the Display Screen

                                                                                                                                    

iPF8400SE

                                                                                                                                                                                                                     

Troubleshooting

The printer stops during a print job

 

590