Printronix P5000LJ Manual Do Utilizador

 282

If a fault condition occurs in the printer, the status indicator on the control 
panel flashes on and off, and the message display indicates the specific fault. 
Fault messages are summarized in Table 24.

Displayed faults fall into one of two categories:

•

Operator correctable

•

Field service required

For operator correctable faults, follow the suggested corrective action in the 
fault message description. After correcting the displayed fault, press the 
CLEAR key to clear the error message and status indicator, and resume 
printing. If the fault message reappears, contact your authorized Printronix 
representative.

For faults that require field service, do two things to try to clear the fault before 
calling your authorized Printronix representative:

1.

Set the printer power switch to O (off), wait 15 seconds, then turn the 
printer on again. Run your print job again. If the message does not 
appear, it was a false indication and no further attention is required.

2.

If the message reappears, press the CLEAR key. If the message goes 
away, it was a false indication and no further attention is required. If the 
message reappears, call your authorized Printronix representative.

Table 24 explains the fault messages and offers solutions where possible.