Ricoh LDD280 Manual Do Utilizador

119

The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed. If a malfunction or a
misfeed occurs, the following messages will appear on the display.

❒ For “Troubleshooting” about printing from a computer, refer to the other

manuals for this machine.

❖ When a Message is Displayed

Check the paper 

size and paper 

direction.

The paper is not placed in the 
same direction as the original.

Place the original in the same di-
rection as the paper.

If you press the {Start} key, the 
selected paper will be used for 
printing.

#### and paper 

size mismatch.

The paper you loaded does not 
match with the reproduction ra-
tio you selected.

Set a paper size that matches the 
reproduction ratio you have se-
lected and your original.

❒ You can make prints if you 

press the {Start} key.

The reproduction ratio selected 
by Auto Magnification mode is 
too big or too small.

Set original.

You have not changed the origi-
nal on the exposure glass before 
pressing the {Start} key.

Place the next original on the ex-
posure glass or in the ADF.

Original is not placed.

Place your originals.

Maximum quanti-

ty: ####

The number of prints exceeds 
the maximum print quantity.

You can change the maximum 
number of prints that can be 
made in one operation with User 
Tools. See p.163 “Maximum 
Print Quantity”.

Minimum quanti-

ty: ####

The number of prints does not 
exceed the minimum print 
quantity.

You can change the minimum 
number of prints that can be 
made in one operation with User 
Tools. See p.163 “Minimum 
Print Quantity”.

Drum Unit is not 

set correctly.

—

Slide in the drum until it clicks.

Make sure that the drum is com-
pletely set in position.