Ricoh LDD280 Manual Do Utilizador

Troubleshooting

120

-When a service call message is shown on the display panel

Press [Exit]. Then turn the main switch off and back on again. If a service code
appears again, contact your service representative.

❒ If a service code appears on the display panel after you turn the main switch

off and on a few times, do not continue turning it on and off. Leave the ma-
chine off.

❒ When you make masters continuously using originals with solid images,

“SC203” tends to appear on the display panel. In this case, turn off the main
switch and wait for a while. Then turn on the main switch.

Communication 

error has oc-

curred. Turn the 

operation switch 

off then on.

—

Turn the operation switch off 
and on.

If the message appears again, 
contact your service representa-
tive.

Print image is 

larger than the 

selected paper 

size. Change pa-

per size.

The master image previously 
printed is larger than the paper. 
The image exceeds the paper 
size.

Make prints after pressing [Exit] 
and selecting the paper size 
again.

❒ If you press [Exit] to erase the 

message and press the {Start} 
key, the machine starts to 
make the prints. However, 
the image might not fit on the 
paper.