Ricoh LDD280 Manual Do Utilizador
Printing Preparations
37
2
D
Hold the handle and unfold the
intermediate feeding section of
the LCIT.
intermediate feeding section of
the LCIT.
Note
❒ Do not release the handle.
E
Lift the end of the intermediate
feeding section and put it down
placing the wheeled support bar
onto the paper feed tray.
feeding section and put it down
placing the wheeled support bar
onto the paper feed tray.
F
Push the LCIT into the machine
until it clicks.
until it clicks.
G
Plug the LCIT optical cable into
the slot located at the left side of
the back of the machine.
the slot located at the left side of
the back of the machine.
Turning On the Power
Important
❒ Make sure to turn on the power
switch of the LCS first, and then
turn on the main switch of the ma-
chine.
turn on the main switch of the ma-
chine.
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
firmly plugged into the wall out-
let.
B
Turn the power switch on.
The green indicator blinks.
The green indicator blinks.
ABQ004S
AJK157S
ABQ006S
ACY066S
ABQ011S