Primera Technology Optical Disc Printing System Manual Do Utilizador

The Printer is designed to operate for extended periods of time

with very little attention. In fact, no regular maintenance is 

recommended other than cleaning the outside case.

A. CLEANING THE PRINTER

Use a clean, lint-free rag with a small amount of ammonia 

window cleaner to clean the Printer's outside case and trays.

This type of cleaner is very effective on inks that may 

accumulate on the printer tray. Stronger cleaning solutions are

NOT recommended because they may damage the paint and

plastic materials from which the parts are manufactured.

Always disconnect your Printer's power cords before cleaning.

Resume operation only after the surfaces are completely dry.

B. PERFORMING A ROBOTIC SELF-TEST

To ensure that everything is working properly, a Self-Test 

feature is built in to your Printer. In this mode, the Robotic 

Disc Transporter will go through the motions of picking and

placing a disc to ensure proper working order. This test may 

be performed without connecting the Printer to the PC.
Perform the test by doing the following steps:
•

Load some discs into the Input Bin

•

Open the top recorder tray by pressing the eject button on

the recorder.

•

Make sure the Printer's front cover is closed

•

With the Printer turned on, press the 

Cartridge Button 

•

While holding the Cartridge Button, press the Power
Button         until the robotics start to move.

510921PM.qxd  1/26/2005  11:12 AM  Page 36