Paxar 9840CL Manual Do Utilizador

Página de 59
48  
••
  Troubleshooting - 5
Paxar Systems Group Paxar 9840CL Printer
Data Formatting Errors
Errors 571 to 618 are data formatting errors.  This type of error happens when a field prints
incorrectly.  Your System Administrator can correct the format, batch, or graphic packet and
send the print job again.  For errors 571 to 614, the printer will still print, but the data may be
incomplete, missing, or wrong.
Error
Description/Action
571
UPC or EAN bar code data length in the batch doesn’t fit the format.
572
Batch data doesn’t fit the format, the field contains blanks, or data mismatch.
573
Batch data in price field doesn’t fit the format or the field contains blanks.
574
Batch data in check digit scheme doesn’t fir the format, or the field contains blanks.
575
The graphic included in your format could not be found.
600
Imaging error because the batch was refused.
601
An error occurred while the batch was imaging.
602
The batch was not found during imaging.
611
Font, bar code, or density in the batch doesn’t fit the format.
612
Batch data is missing or doesn’t match the format.
613
Reference point off tag.
614
Portion of field off tag.
615
Bar code width is greater than 16 inches, or keywords of PDF417 bar code exceed
928.
616
A bad dot falls on a bar code that cannot be shifted.  Call Service or replace the
printhead.
618
Magnification must be to 7.
620
Font and printhead density mismatch.  Check the font or verify the correct
printhead (203 dpi or 300 dpi) is installed.