Konica Minolta 752 Manual Do Utilizador

5-3.Removing Jam

56    DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6

"

Film jam between HPRO section and
cooling/discharge section

The screen on the right shows the example where a film jam
occurs between the HPRO section (in the HPRO unit cover)
and the cooling/discharge section. Follow the procedure
below to remove the jammed film.

(1) Hold the green handle of the release lever and 

raise it leftward.

(2) Turn the handle on the HPRO unit cover counter-

clockwise.

The film in the HPRO unit cover is transported into the cooling
/ discharge section.

The temperature around the HPRO section and
the cooling/discharge section may reach 80 °C
(176 °F) or over. Before removing the jammed film,
allow those sections to cool off.

 

 

HPRO unit

Handle