Savin SLP38C Manual Do Utilizador
Replacing Consumables and Maintenance Kit
12
1
C Lift and hold the green handle
at the top (
A
A
A
A), and pull out the
unit slowly (
B
B
B
B).
H
Install a new Photoconductor Unit.
For black, install one, and for color,
install three.
A Take the unit out from the bag.
For black, install one, and for color,
install three.
A Take the unit out from the bag.
Important
❒ Do not remove the cover that is
attached to the bottom of the Pho-
toconductor Unit at this time.
toconductor Unit at this time.
B Place the Photoconductor Unit in
your left hand, and remove the ad-
hesive tape at the tip of the unit.
hesive tape at the tip of the unit.
C Match the green arrow at the
tip of the Photoconductor Unit
to the rail inside the printer.
to the rail inside the printer.
Important
❒ Make sure the green arrow
fits securely on the rail before
proceeding to the next step.
proceeding to the next step.
D Push the front of the Photocon-
ductor Unit slowly with your
right hand, slide the unit on
the cover, and push in until it
stops.
right hand, slide the unit on
the cover, and push in until it
stops.
Important
❒ If you do not attach the green
arrow of the Photoconductor
Unit securely to the rail, you
might damage the Photocon-
ductor Unit.
Unit securely to the rail, you
might damage the Photocon-
ductor Unit.
❒ Do not touch the light-sensi-
tive area of the Photoconduc-
tor Unit.
tor Unit.
ZDJH210J
ZDJH221J
ZDJH222J
ZDJH223J
ZDJH224J