Savin SLP38C Manual Do Utilizador
Replacing the Photoconductor Unit
13
1
E Remove the cover and push in
the Photoconductor Unit until
it stops.
it stops.
I
Lower the inner cover slowly.
J
Tighten two screws using provid-
ed screwdriver.
ed screwdriver.
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the back of the front cov-
er.
tion on the back of the front cov-
er.
K
Turn the light brown lever clock-
wise.
wise.
L
Close the front cover slowly by
pushing the two areas on the left
and right.
pushing the two areas on the left
and right.
M
Plug in the power cable and turn
on the power switch.
The following message appears on
the panel display. The printer
starts calibration. Please wait until
it stops.
on the power switch.
The following message appears on
the panel display. The printer
starts calibration. Please wait until
it stops.
Calibrating...
Important
❒ Do not turn off the power
switch during calibration to
avoid a printer malfunction.
avoid a printer malfunction.
ZDJX702E
ZDJH018J
ZDJH019J
ZDJH020E
ZDJH041J