Savin 3799 Manual Do Utilizador

Página de 320
Other Transmission Features
88
3
Manual Dial
The optional handset or an external telephone is required to use this function. 
Pick up the handset or the external
telephone and dial. When the line is
connected and you hear a high-
pitched tone, press the 
{{{{Start}}}} key to
send your fax message. If, on the oth-
er hand, you hear a voice at the other
end, continue your conversation as
you would normally over the tele-
phone.
Note
❒ Manual Dial does not work with
ISDN lines.
❒ Results of transmissions with this
feature are not mentioned in the
Transmission Result Report.
❒ You can specify destination with
the number keys, Quick Dial key
or Speed Dial.
❒ While using the optional handset
or an external telephone, you can
store the fax documents for the
Memory Transmission if "Storing
fax documents for the Memory
Transmission while using the
Manual Dial function" is set to "En-
able" with User Parameters. How-
ever, while this feature is set to
"Disable", you cannot transmit fax-
es using the Manual Dial function.
See p.178  “Us er Parameters”
(switch 09 bit 4).
❒ If you lift the handset immediately
after the machine switches to
Night Timer mode, there will be no
sound for a maximum of 4 sec-
onds. When you can hear sound
again, you can continue.
AAAA
Set the original and select any
scan settings you require. 
BBBB
Pick up the external telephone. 
You will hear a dial tone.
CCCC
Dial.
The fax number you enter is dialed
immediately.
Note
❒ If you incorrectly enter the
number, replace the external
telephone and try again from
step 
B.
DDDD
When the line is connected and
you hear a high-pitched tone,
press the 
{{{{Start}}}} key to send your
fax message, and replace the
handset of the external telephone.
Transmission starts. 
After transmission the machine
will return to the standby mode.
Note
❒ If someone picks up the phone at
the other end, ask them to do what
is necessary to receive the fax.
❒ If you wish to cancel transmis-
sion while it is in progress, press
the 
{{{{Stop}}}} key then remove the
original.