Savin 3799 Manual Do Utilizador

Selecting the Line

89

Installing all of these options expands
the machine's line capacity to a maxi-
mum of 3 lines.
The optional Extra G3 Interface Unit
connects to the PSTN, the optional
ISDN Unit to the ISDN.

❒ Only one PSTN line is available

with the base machine without any
options installed.

❒ Up to three lines can be used si-

multaneously.

❒ One ISDN line allows you to com-

municate with two communica-
tion lines, however, if connected
through PBX, you may only be
able to use one communication
line.

❒ The optional Extra G3 Interface

Unit can be connected to a PSTN
line.

❒ The optional Extra G3 Interface

Unit can be for reception exclusive
use. To change the setups, please
contact your service representa-
tive.

❒ The optional ISDN Unit can be

connected to an ISDN line.

❒ When sending a fax and choosing

the line, you can only specify desti-
nations with the number keys and
the Chain Dial feature.

❒ The following display is shown

when neither the optional Extra G3
Interface Unit or optional ISDN
Unit is installed.

❒ You can set the default G3 line or

expanded G3 line as the PABX line
with User Parameters. See p.178
“User Parameters” (switch 13 bit
0), (switch 13 bit 2).

❒ The On Hook Dial function is not

available with the lines expanded
by the optional units. See p.85 “On
Hook Dial”.

❒ Your machine may not respond to

a transmission received through
an ISDN PBX, detecting it as a tele-
phone call, not as a fax message.
You can set "Respond to a trans-
mission received through an ISDN
PBX unconditionally" to "On" with
User Parameters. See p.178 “User
Parameters” (switch 13 bit 6).

❒ The table for the available combi-

nation of the connected line type(s)
and the communication type(s) is
as follows:

Base 
Machine

PSTN G3

Base Ma-
chine + Op-
tional Extra 
G3 Interface 
Unit

PSTN + 
PSTN 
(Option)

G3 + G3

Base Ma-
chine + Op-
tional ISDN 
Unit

PSTN + 
ISDN 
(Option)

G3 + G4

I-G3 + G4

G3 + G4 + 
G4

G4 + G4

ISDN 
(Option)

I-G3 + G4

G4 + G4