Psion Teklogix PX750 Manual Do Utilizador

Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser 
begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which 
you can enter a value from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming-dot.

Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the 
scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in 
which you can enter a value between 5 and 99, each number representing 0.1 seconds.

Continuous Scan Mode
Setting this parameter to on keeps the laser on and continuously decoding as long as the 
scanner button is pressed and held down.

Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned 
off, once the scanner trigger or button is released. This gives the scanner a minimum amount 
of time to complete its current decode before the scan is cancelled when the user quickly 
triggers on/off.

Low Power Timeout
To extend laser life, you can select the time the scanner remains active following a success-
ful decode. The scanner wakes from low power mode when a bar code is scanned—a 
successful decode restores normal blinking.
This is only used if the unit’s Trigger Mode has been changed to Continuous On. If the unit 
is used in a fixed mount this parameter might be used, but not if the unit is used as a hand-
held. 
When you double-tap on this parameter, a dialog box is displayed in which you can choose a 
value of 30 sec., 1 min., 2 min., or 3 min.

Parameter Scanning
Setting this parameter to on allows the scanner to respond to programming bar codes that 
can be found in the scanner manual. Scanning these is an alternative way to reprogram some 
of the scanner features