Psion Teklogix PX750 Manual Do Utilizador

When this parameter is enabled, a bar code must be successfully scanned in both directions 
(forward and reverse) before being decoded.

Scan Angle
This option allows you to choose from two scan angles: Normal Angle or Alternate Angle. 
Choosing Normal Angle allows the normal operation for scanning long range and short 
range. Choosing Alternate Angle widens the beam to allow scanning of long bar codes at 
short range but at the cost of long range scanning.

Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character 
prefix already selected, the code ID character is inserted between the prefix and the 
decoded symbol.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a 
transmit code: None, AIM, or Symbol.

Scan Data Format
This parameter allows you to change the scan data transmission format. Double-tapping on 
Scan Data Format displays the following options from which you can choose a data 
format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data [S1], 
[P] data [S2], and [P] data [S1][S2].

Prefix [P], Suffix [S1] And Suffix [S2]
A prefix and/or one or two suffixes may be appended to scan data for use in data editing.
When you double-tap on these parameters, a dialog box is displayed in which you can enter 
a value from 0 to 255.

Delete Char Set ECIs
Setting this parameter to on enables the scanner to delete any escape sequences representing 
Character Set ECIs—Extended Channel Interpretations (also known as GLIs) – from its 
buffer before transmission.