Psion Teklogix PX750 Manual Do Utilizador

The quad docking station permits each of four docked NEOs to communicate with a 10/100 
BaseT Ethernet network. It also provides sufficient power to operate the hand-helds and 
charge their batteries. 

Refer to instruction sheet PN 1081342 for a checklist of startup steps. You can find this 
instruction sheet on Teknet. Go to www.psionteklogix.com. Tap on Teknet and enter you 
user name and password. If you’re not already a member, you will be asked to register free 
of charge.

The quad dock is equipped with a power indicator LED and RJ45 link and traffic 
indicator LEDs. When a valid link is established, a green LED is illuminated next to 
the RJ45 connector.

•

Slide NEO into the cradle portion of the quad dock until lightly latched. 

The LED on the hand-held unit lights up to show it has external power and may start charg-
ing the battery.
Interaction with NEO while in the quad dock is a function of the user application software 
used to communicate with the host network.

The quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held 
units. The hand-helds are connected to an internal USB hub. The hand-held unit automati-
cally detects insertion into a quad docking station and loads the appropriate drivers to 
communicate with the USB/Ethernet converters.

Although the USB converters have fixed Ethernet MAC addresses, there is generally no cor-
relation between these addresses and a specific hand-held. The host application uses 
standard TCP/IP protocol to name, locate and communicate with a specific NEO on 
the network.