Psion Teklogix PX750 Manual Do Utilizador

If a link is established between a NEO and a host, the application on the host and on the 
hand-held must have a recovery mechanism in the event that NEO is removed from the dock 
and the link is interrupted.

Charge status is displayed on the hand-held LED. Refer to Table 6.3 on page 191 for 
detailed LED charge behaviour. A NEO inserted in the quad dock requires 3 hours to 
charge the battery to 75% capacity. Charge durations are independent of the number of 
NEOs docked.

The indicators, applications and drivers required to use and monitor the docking station are 
installed on NEO – no indicators or applications are present on the docking station itself.

If a network link fails, the application must take appropriate action.

•

Check that the quad docking station has power: Is the Power LED on the docking 

station illuminated?

•

Try inserting NEO in another well in the quad dock.

•

Check for dirt or contamination on the docking contacts at the bottom of NEO. Wipe the 

contacts with a damp cloth if necessary. 

•

Check the connector pins inside the dock cradle for dirt. Gently wipe with a soft cloth if 

they appear to be dirty or discoloured.

•

Check that the contacts are not bent or damaged.

•

Remove and reinsert NEO in the cradle.

•

Make certain that the battery installed in NEO is not defective.

NEO supports 1D laser scanner (SE955) and 1D imager (EV15) options to address a variety 
of user application requirements. The scanner/imager installed in your unit can be config-