Toshiba M30-35 Manual Do Utilizador
3.9 Printer Test
3 Tests and Diagnostics
3.9 Printer
Test
To execute the Printer Test, select
6
from the DIAGNOSTIC TEST MENU, press
Enter
and
follow the directions on the screen. The following messages will appear after selecting the
Printer Test from the DIAGNOSTIC TEST MENU. Answer each of the questions with an
appropriate response to execute the test.
Printer Test from the DIAGNOSTIC TEST MENU. Answer each of the questions with an
appropriate response to execute the test.
NOTE: A Port Replicator and an IBM compatible printer must be connected to the
system to execute this test.
The following message will appear, after selecting the subtest 01 to 03 of the printer test:
channel#1 = XXXXh
channel#2 = XXXXh
channel#3 = XXXXh
Select the channel number (1-3) ?
The printer I/O port address is specified by the XXXXh number. The computer supports
three printer channels. Select the printer channel number, and press
three printer channels. Select the printer channel number, and press
Enter
to execute the
selected subtest.
Subtest 01
Ripple Pattern
This subtest prints characters for codes 20h through 7Eh line-by-line while
shifting one character to the left at the beginning of each new line.
shifting one character to the left at the beginning of each new line.
Satellite M30-35 Maintenance Manual (960-455)
3-21