Toshiba M30-35 Manual Do Utilizador
3.10 Async Test
3 Tests and Diagnostics
3.10 Async Test
To execute the Async Test, select
7
from the DIAGNOSTIC TEST MENU, press
Enter
and
follow the directions displayed on the screen. Move the highlight bar to the subtest you want
to execute and press
to execute and press
Enter
.
Subtests 06 and 07 require the following data format:
Method: Asynchronous
Speed:
Speed:
38400BPS
Data:
8 bits and one parity bit (EVEN)
Data pattern: 20h to 7Eh
Subtest 06
FIR/SIR Point to point (send)
NOTE: To execute subtests 06 and 07, each computer must have access to the other
computer’s infrared port.
This subtest sends 20h through 7Eh data to the receive side, then receives the
sent data and compares it to the original data through the FIR/SIR port.
sent data and compares it to the original data through the FIR/SIR port.
Subtest 07
FIR/SIR Point to point (receive)
This subtest is used with subtest 06 described above. This subtest receives the
data from the send side, then sends the received data through the FIR/SIR
port.
data from the send side, then sends the received data through the FIR/SIR
port.
Satellite M30-35 Maintenance Manual (960-455)
3-23