Toshiba M505 Manual Do Utilizador

 

 

Look over the procedures in this section before you begin disassembling the computer. 

Familiarize yourself with the disassembly and reassembly steps. Begin each procedure by 

removing the AC adaptor and the battery pack as instructed in this section: 

1.  Do not disassemble the computer unless it is operating abnormally. 

2.  Use only the correct and approved tools. 

3.  Make sure the working environment is free from the following elements whether 

you are using or storing the computer. 

  Dust and contaminates 
  Static electricity 
  Extreme heat, cold and humidity 

4.  Make sure the FRU you are replacing is causing the abnormal operation by 

performing the necessary diagnostics tests described in this manual. 

5.  Do not perform any operations that are not necessary and use only the described 

procedures for disassembling and installing FRUs in the computer. 

6.  After removing parts from the computer, place them in a safe place away from the 

computer so they will not be damaged and will not interfere with your work. 

7.  You will remove and replace many screws when you disassemble the computer.   

When you remove screws, make sure they are placed in a safe place and identified 

with the correct parts. 

8.  When assembling the computer, make sure you use the correct screws to secure 

the various pieces in place.    Screw sizes are listed in their corresponding figures. 

9.  The computer contains many sharp edges and corners, so be careful not to injure 

yourself. 

10. After you have replaced a FRU, make sure the computer is functioning properly 

by performing the appropriate test on the FRU you have fixed or replaced.