Toshiba M505 Manual Do Utilizador

The computer has three basic types of cable connectors: 

  Pressure Plate Connectors   

  Coaxial Cable Connectors   

  Normal Pin Connectors 

To disconnect a Pressure Plate connector, lift up the tabs on either side of the connector’s 

plastic pressure plate and slide the cable out of the connector.    To connect the cable to a 

Pressure Plate connector, make sure the pressure plate is fully lifted and slide the cable 

into the connector.    Secure the cable in place by pushing the sides of the pressure plate 

down so the plate is flush with the sides of the connector.    Gently pull on the cable to 

make sure the cable is secure.    If you pull out the connector, connect it again making 

sure the connector’s pressure plate is fully lifted when you insert the cable. 

Coaxial cables should be disconnected with an antenna coaxial disconnector. 

Standard pin connectors are used with all other cables.    These connectors can be 

connected and disconnected by simply pulling them apart or pushing them together.