Toshiba TECRA S1 Manual Do Utilizador

Remove the display mask according to the following procedures and Figure 4-35.  

1.  Remove  the following 2 bumps and 6 seals on the display module  in that order: 

- Two black seals on the bottom  
- Two silver seals on each of the left and right sides 
- Two rubber bumps on the top  

2.  Remove the following 8 screw on the display module, in that order: 

- Two M2.5x3.5 black flat-head screws on the bottom 
- Two M2x5.5 black flat-head screws on each of the left and right sides 
- Two M2.5x3.5 black flat-head screws on the top 

3.  Release the following 18 latches on the display mask, in that order: 

- Six bottom latches 
- Four latches on each of the left and right sides 
- Four top latches