Toshiba TECRA S1 Manual Do Utilizador

When a test item is running, a Diagnostics Windows is displayed in full screen. It consists of 
the following parts: Title Bar, Test Running Status and Report Panel, Status Bar. There 
would prompt a message box called USER BREAK in the central of the window whether 
user press ESC to interrupt the test. 

Test Running Status and Report Panel is located on the middle of Diagnostics Windows. 

 

Test item name, test process and test result are displayed in the left; 

 

Test status and result are displayed in the upper right corner of the screen. It displays the 

test status of the current test item – TEST (in testing), PASS (test finished and its result 
is passed), FAIL (test finished and its result is failed) and SKIP (test skipped). 

 

The error list of each test module is displayed at the lower right corner of the screen. It 

would display the total error quantity found in the test, the most recent five error codes 
and description would be shown here. Detailed error report could be viewed with 
Logview.exe. 

 

 When pressing ESC key during the test process , a User Break Windows will be popped 

up for the user to select.  

Pressing ESC key to interrupt the test, USER BREAK message box would be prompted out 
in the central of Diagnostics Window for the user to select the following actions: 

 

CONTINUE---- Continue the test; 

 

SKIP---- Stop the sub-item of current test item to go to the next item’s test; 

 

ABORT----Stop the current test item to test the next module. 

 

ABORT ALL---- Stop all the selected test items. User could use the hot key Ctrl+D to 

achieve the same operation. When the user calls ABORT ALL, the following message 
box will prompt for his selecting. 

 

Title Bar located at the top of the window, it includes information as follows: