Toshiba TECRA S1 Manual Do Utilizador

 

Program Name and Its Version: Service Diagnostic Ver1.00; 

 

 Test Module Name: Label the name and version of the test module. For example, in the 

above screen, the name of the test module is ‘Memory Tester Build Date 2002.12.31’.  

 

Status Bar: Located at the bottom of the screen as follows: 

 

The status bar is used to indicate the current script setting and test status. It consists of two 
lines that includes the information as follows: 

 

Test Mode: TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen; 

 

Script File Name: Script file name, e.g. ‘Quick.INI’ in the above screen; 

 

Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2002-12-22 10:46:05’ in 

the above screen; 

 

Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining 

test time at the same location as Current TIME (C. TIME) in the above screen; 

 

Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number 

planning to execute and the current LOOP number have been finished, e.g. ‘COUNT: 
01/01’ in the above screen; 

 

CPU Temperature: Detect the temperature in the current CPU, e.g. ‘CPU: 49C’ in the 

above screen; 

 

Remaining Battery Capacity: Remaining Battery Capacity detected in the current 

Battery, e.g. ‘BAT: 97%’; 

 

Test Order: Define the test sequence. There are two sequence modes: Sequential Test 

Mode and Random Test Mode. The default mode is Sequential Test Mode, it would 
displays ‘ORDER: SEQ’ as in the above screen; 

 

LOG File Name: Display the file name of the test log, e.g. Quick.Log in the above 

screen; 

 

Start Test Time (S.TIME): Display the test start time for the current test item or the test 

script, e.g. ‘S.TIME: 2002-12-22 10:46:05’ in the above screen; 

 

Break On Error: Display ‘HALT’ as shown in the above screen when ‘Break On Error’ 

is enabled; 

 

Wait On Error: Display ‘WAIT’ as shown in the above screen when ‘Wait On Error’ is 

enabled;