Toshiba 960-498 Manual Do Utilizador

To execute the System Test, select 

 from the DIAGNOSTIC TEST MENU, press 

and follow the directions on the screen. Move the highlight bar to the subtest you want to 
execute and press 

. 

Subtest 01 

ROM Checksum 

This subtest executes a checksum test of the BIOS ROM (range: F0000h to 
FFFFFh, 64KB) on the System Board. 

Subtest 02 

Fan ON/OFF 

This subtest turns on/off the fan motor by force with Fan ON/OFF commands. 

The following message will appear. 

Fan number select (1;FAN#1, 2;FAN#2, 0; FAN#1&#2) ? 

To check the CPU fan, press 

 and 

Enter. 

To check the VGA fan, press 

 and 

Enter. 

To check both CPU fan and VGA fan, press 

 and 

Enter.

 

The following message will appear.  

Fan test execute now ... (CPU:xxxxRpm / GPU:xxxxRpm)  

*** Test Fan Revolution 0000RPM start 

Make sure the specidfied fan does not rotate and the message of fan revolution 
for it is “0000Rpm”. Then press 

Enter.

 

The following message will appear.  

*** Test Fan Revolution Low speed Start 

Make sure the fan rotates at low speed and the message of fan revolution for it 
changes. Then press 

Enter.

 

The following message will appear.  

*** Test Fan Revolution High speed Start 

Make sure the fan rotates at high speed and the message of fan revolution for 
it changes. Then press 

 

After a while, the fan rotating will stop.

 

Subtest 03 

Geyserville