Справочник Пользователя для Toshiba 960-498
3.6 System Test
3 Tests and Diagnostics
3.6 System
Test
To execute the System Test, select
1
from the DIAGNOSTIC TEST MENU, press
Enter
and follow the directions on the screen. Move the highlight bar to the subtest you want to
execute and press
execute and press
Enter
.
Subtest 01
ROM Checksum
This subtest executes a checksum test of the BIOS ROM (range: F0000h to
FFFFFh, 64KB) on the System Board.
FFFFFh, 64KB) on the System Board.
Subtest 02
Fan ON/OFF
This subtest turns on/off the fan motor by force with Fan ON/OFF commands.
The following message will appear.
Fan number select (1;FAN#1, 2;FAN#2, 0; FAN#1) ?
To check the CPU fan, press
1
and
Enter.
To check the VGA fan, press
2
and
Enter.
To check both CPU fan and VGA fan, press
0
and
Enter.
The following message will appear.
Fan test execute now ... (CPU:xxxxRpm / GPU:xxxxRpm)
*** Test Fan Revolution 0000RPM start
Make sure the specidfied fan does not rotate and the message of fan revolution
for it is “0000Rpm”. Then press
for it is “0000Rpm”. Then press
Enter.
The following message will appear.
*** Test Fan Revolution Low speed Start
Make sure the fan rotates at low speed and the message of fan revolution for it
changes. Then press
changes. Then press
Enter.
The following message will appear.
*** Test Fan Revolution High speed Start
Make sure the fan rotates at high speed and the message of fan revolution for
it changes. Then press
it changes. Then press
Enter
After a while, the fan rotating will stop.
Subtest 03
Geyserville
3-14
QOSMIO F10 Maintenance Manual (960-498)