Toshiba 960-498 Manual Do Utilizador

2.  Unlock the CPU by rotating the cam on the CPU socket 180 degrees to the 

counterclockwise with a flat-blade screwdriver. 

3.  Remove the CPU. 

 

Cam

The following describes the procedure for installing the heat sink and CPU (See Figure 4-28 
to 4-30). 

1.  Check that the mark of cam is in the unlocking position. 

2.  Attach the CPU to the correct position in the CPU socket. 

3.  Fix the CPU by rotating the cam 180 degrees to the clockwise with a flat-blade 

screwdriver. 

4.  If there is already silicon grease on the CPU, clean it with a cloth. 

Using a special applicator, apply silicon grease so that the CPU chip on the CPU is 
completely covered.