Toshiba 960-498 Manual Do Utilizador

The following describes the procedure for removing the VGA heat sink (See Figure 4-31). 

1.  After removing the following screws, remove the VGA heat sink. 

•  M2×4Z  BIND 

screw  x3 

 

VGA heat sink 

M2x4Z  BIND 

The following describes the procedure for installing the VGA heat sink (See Figure 4-30 and 
4-31). 

1.  If there is already silicon grease on the VGA, clean it with a cloth. 

Using a special applicator, apply silicon grease so that the VGA chip on the VGA is 
completely covered. 

2.  Install the VGA heat sink and secure them with the following screws.  

•  M2×4Z BIND 

screw   x3