Advantech AWS-8248 Manual Do Utilizador
AWS-8248 User’s Manual
52
B.3 24 V
DC
power supply
This is a DC to DC switching mode power supply with a 24 V
DC
input.
Input voltage:+19 ~ +32 V
DC
(normal operation)
Input current:16 A max. @ +24 V
DC
input
Inrush current:10 A max. @ +24 V
DC
input
Output load range:
Table B.3: 24 V
DC
power supply output load range
Output No OutputMin. load
Rated load Peak load Voltage accuracy
1
+5 V
1.0 A
25 A
30 A
4.90 ~ 5.10 V
2
+12 V 0 A
10 A
12 A
11.28 ~ 12.72 V
3
-12 V
0 A
1 A
2 A
-11.40 ~ -12.60V
4
-5 V
0 A
1 A
2 A
-4.75 ~ -5.25 V
At the factory, the +5 V output was set between 5.00 and 5.10 V, while
other outputs were simultaneously set at 60% of their respective rated
loads.
other outputs were simultaneously set at 60% of their respective rated
loads.
The -5 V and -12 V outputs can be used at their respective rated loads.
The +5 V output should carry a load of at least 4 A.
The +5 V output should carry a load of at least 4 A.
Output power:
Total DC continuous power does not exceed 250 W. Each output should
be able to operate continuously under its maximum load.
be able to operate continuously under its maximum load.
Ripple and noise:
Peak to peak ripple and noise for each output is less than 1% of
each output’s respective voltage. Measurements were performed
with a 15 MHz bandwidth limited oscilloscope, and each output
was terminated with a 0.47
each output’s respective voltage. Measurements were performed
with a 15 MHz bandwidth limited oscilloscope, and each output
was terminated with a 0.47
µF capacitor.
V