Avaya V880 Instrução De Instalação
Turning on the system and verifying POST
Issue 2.0 June 2004
37
9. Enter:
probe-scsi-all
This verifies that the system sees the disk drives and backplane, the tape drive, and
the DVD-ROM drive. A message that is similar to the following is displayed:
the DVD-ROM drive. A message that is similar to the following is displayed:
10. Verify that all of the devices are recognized. If the devices are not recognized, see
on page 180 for more information.
11. When you have verified that the system recognizes all of its devices, enter the
following commands:
!
CAUTION:
CAUTION:
If you fail to reset the auto-boot option, any reboots that you do in the future
will stop at the boot prompt instead of proceeding through the normal
boot-up process.
will stop at the boot prompt instead of proceeding through the normal
boot-up process.
setenv auto-boot? true
boot
The system reboots.
/pci@8,600000/SUNW,qlc@2
LiD HA LUN
--- Port WWN ---
-----Disk description -----
0
0
0
21000004cf72f08f
SEAGATE ST373405FSUN3660438
1
1
0
21000004cf721553
SEAGATE ST373405FSUN3660438
6
6
0
508002000016b5b1
SUNW
SUNWGS INT FCBPL9224
3
3
0
21000004cf72114b
SEAGATE ST373405FSUN3660438
4
4
0
21000004cf7211ae
SEAGATE ST373405FSUN3660438
/pci@8,700000/scsi@1
Target 5
Unit 0
Removeable Tape
HP
C5683A
C005
Target 6
Unit 0
Removeable Read Only device
TOSHIBA DVD-ROM SD-M14011009
/pci@8,700000/pci@5/SUNW,1sptwo@4