Avaya V880 Instrução De Instalação

Página de 208
Identifying installed PCI cards
Issue 2.0 June 2004
39
Identifying installed PCI cards
If there are problems with the PCI cards, do the following to troubleshoot the problem. If all 
PCI cards are operational, you can skip this procedure.
At the command prompt, enter:
/usr/platform/‘uname -m‘/sbin/prtdiag -v | pg
In the section IO Cards, there is a listing of the PCI cards. The following are examples of 
some of the entries you may see. The display you see depends on your specific 
configuration.
In this example:
Slot 0 has a Dual FastEthernet and Dual SCSI card. There is more than one entry for a 
this card because the card has two SCSI ports and two Ethernet ports.
Slot 1 has a FastEthernet card. There is more than one entry for the FastEthernet card 
because the card has the ethernet port and a Media Independent Interface (MII) port 
(not used with CMS).
Slot 3 has an HSI/P card.
Slot 7 has a graphics card.
.
.
========================= IO Cards =========================
                         Bus  Max
     IO   Port Bus       Freq Bus  Dev,
Brd  Type  ID  Side Slot MHz  Freq Func State Name
Model
---- ---- ---- ---- ---- ---- ---- ---- ----- ------------------------------------------------------
I/O  PCI   8    B    3    33   33  2,0  ok    pci1214,334-pci1214,334.10
I/O  PCI   8    B    1    33   33  4,0  ok    pci108e,1000-pci108e,1000.1
I/O  PCI   8    B    1    33   33  4,1  ok    SUNW,hme-pci108e,1001 SUNW,qsi-cheerio
I/O  PCI   9    B 
0
33   33  3,0  ok    pci-pci8086,b154.0/network (netw+PCI-BRIDGE
I/O  PCI   9    B 
0
33   33  0,0  ok    network-pci100b,35.30 SUNW,pci-ce/pci-bridge
I/O  PCI   9    B 
0
33   33  1,0  ok    network-pci100b,35.30 SUNW,pci-ce/pci-bridge
I/O  PCI   9    B 
0
33   33  2,0  ok    scsi-pci1000,b.7/disk (block) device on pci-bridge
I/O  PCI   9    B 
0
33   33  2,1  ok    scsi-pci1000,b.7/disk (block) device on pci-bridge
I/O  PCI   9    A    7    66   66  2,0  ok    SUNW,XVR-100 SUNW,375-3181
.
.